Service, Repair & Calibration Services

 

   
        
   

Celemetrix understands that long delays in the maintenance of your equipment can impact the efficiency, effectiveness and profitability of your organisation. Sending equipment overseas for maintenance purposes significantly increases cost and limits equipment availability.

The Celemetrix Service, Repair and Calibration (SRC) division offers extensive local calibration, repair and functional testing services across a range of equipment used in many different industries. Our industry leading laboratory facilities are relied upon by many of Australia's leading organisations.

The Celemetrix SRC operates a quality management system that complies with ISO9001 & ISO17025 international standards and is also NATA accredited. Our work practices and procedural guidelines ensure that all of our customers are provided with a professional, personalised service every time they require assistance.

As well as looking after some of Australia’s largest test and measurement equipment fleets, Celemetrix is a trusted service partner for many of the largest global test and measurement equipment vendors.

What sets us apart from others in the industry is our ability to consistently achieve short turnaround times as a result of our extensive local infrastructure, large quantity of trained technicians and comprehensive fleet of hot swap equipment.

Turn Around Time Commitment:

  • Calibration - Less than 5 days
  • Repair - Less than 10 days
  • Calibration and Repair - Less than 15 days
  • FastTrack - 24 hours

Authorised Service Provider:

Repair and calibration services are offered across the following technologies:

  • Optical Testers
  • Cable and Transmission Testers
  • Pressure and Vacuum
  • Force and Torque
  • Analytical Devices
  • Dimensional
  • RF Measurement - up to 26.5GHz
  • Electrical Testers
  • Fluke Networks - Copper and Fibre Cable Testers
  • Scales, Balances and Masses 
  • Temperature and Humidity
  • Light, Video and Sound
       

To discuss your service, repair or calibration requirements or to book your equipment in, please call on 1800 256 838 or submit a query via the link below.

Enquire Now

Our Partners

     

Upcoming Events

CMT-11-180A Perth

25-Aug-2017

Advanced Optical Commissioning & Reporting

Designed for all skill levels, all through an understanding of OTDR principles is highly recommended. This course is designed to provide attendees with the required skills to confidently provide an accurate OTDR analysis report with repeatable results. This 1 day course focuses on an understanding of OTDR trace elements, trace analysis, report generation and automation. With extensive hands on exercises, this course will develop the practical skills required to efficiently generate an optical fibre workbook using reporting automation.

* Required























CMT-06-020 Sydney

28-Aug-2017

   

 Fibre Optic Splicing & Joint Enclosure

Designed for all skill levels, this course provides each attendee with an opportunity to secure the skills required to confidently install fibre optic joint enclosures used within a carrier network and splice fibre optic cores. Each attendee will construct a minimum of six carrier certified high fibre count joint enclosures. These are chosen to incorporate all the disciplines needed to confidently assemble most joint enclosures available and splice fibre optic cores without causing fault conditions.

* Required























CMT-16-510 Brisbane

28-Aug-2017

* Required























  • Mobile Calibration Service Program

    Celemetrix is coming to a town near you!

  • Test and measurement rental equipment

    Commercially attractive solutions to meet your technical needs!

  • 2016 Training Calendar

    Celemetrix training services - value through knowledge and experience. Registrations are now open!

  • Hand Tool Kits

    Be confident that you have the right tools for the job.

  • Service Repair and Calibration Capabilities

    Celemetrix offers extensive local calibration, repair and functional testing services across a range of equipment.

  • Test and Measurement Equipment : Ex-Rental SALE!

    Secure a bargain from our sale of ex-rental products. All items fully calibrated.

Probably the best overall industry course I've done in 20 years in the industry. Well run and well presented.

Anthony Gibson, CG Communications

The course was excellent and very well presented. Even after years of experience with OTDRs, I still learnt a thing or two. I would highly recommend and wish I could have sat this course at the start of my career. Kenny was one of the best trainers I've come across.

Brock Richens, NBN Co.

Excellent teacher. Attended similar courses before, this one 'brought it all together'. More usable in the workplace. Easier to understand, very thorough explanation.

Keith Masuwale, NBN Co.

Andrew, the trainer was very knowledgeable, easy to understand and was a great help when I needed help. Very good. Thanks.

Luke Von Wald, VisionStream

Thankyou to Matt & his team for bringing this unit to the west, I look forward to seeing you next year for a repeat of the excellent service received over the last few years.

Mal Fawcett, Optimal Fibre Service

Thanks again for the training, I didn’t expect I would get as much out of it as I did. Let me know when the next splicing course comes to Perth, I’ll book a few seats on it.

Michael O'Malley, Minelect Pty Ltd

Thanks for the great NBN & FTTP training session we had yesterday. It is extremely useful to receive information from someone directly involved in what’s going on.

Mike Ott, C-COR

With regards to our recent equipment calibrations, I would like to thank you and your team for your efficient service. The fact that you worked over the weekend to have our equipment available for Monday morning was really appreciated.

Stuart Hosie, Visionstream


> Request Access to NBN Software Area