2017 Mobile Calibration Program

Mobile Calibration Program 2016

Celemetrix Australia is excited to announce that it's taking its calibration service on the road... bringing it directly to you!

Our Mobile Calibration Service will benefit you in a number of ways:

  • 48 hour Turnaround Time
  • Competitive Pricing
  • Traceable to National Standards


Calibration capabilities include, but not limited to:

  • OTDRs, Optical Light Sources, Power Meters and Attenuators
  • Fusion Splicers and Cleavers
  • DTX 1200/1800 Cable Testers
  • DTX MFM/SFM/OTDR Modules
  • Fluke Optifibers
  • PDH/SDH BERT Testers from 2Mb/s-10Gb/s
  • Ethernet Testers 10Mb/s-10Gb/s
  • Optical Spectrum Analysers/Multi Wavelength Meters
  • ... and many more


Locations as follows:


  • Tasmania: January 30th - February 3rd
  • Adelaide: February 6th - February 17th
  • Perth: February 20th - March 3rd
  • Sydney: March 6th - March 17th
  • Brisbane: March 27th - April 7th 

Mobile Calibration Capablities Mobile Calibration Capablities (2001 KB)



To discuss your service, repair or calibration requirements or to book your equipment in, please call on 1800 256 838 or submit a query via the button below.

Enquire Now

 


Our Partners

     

Upcoming Events

CMT-11-180A Perth

25-Aug-2017

Advanced Optical Commissioning & Reporting

Designed for all skill levels, all through an understanding of OTDR principles is highly recommended. This course is designed to provide attendees with the required skills to confidently provide an accurate OTDR analysis report with repeatable results. This 1 day course focuses on an understanding of OTDR trace elements, trace analysis, report generation and automation. With extensive hands on exercises, this course will develop the practical skills required to efficiently generate an optical fibre workbook using reporting automation.

* Required























CMT-06-020 Sydney

28-Aug-2017

   

 Fibre Optic Splicing & Joint Enclosure

Designed for all skill levels, this course provides each attendee with an opportunity to secure the skills required to confidently install fibre optic joint enclosures used within a carrier network and splice fibre optic cores. Each attendee will construct a minimum of six carrier certified high fibre count joint enclosures. These are chosen to incorporate all the disciplines needed to confidently assemble most joint enclosures available and splice fibre optic cores without causing fault conditions.

* Required























CMT-16-510 Brisbane

28-Aug-2017

* Required























  • Mobile Calibration Service Program

    Celemetrix is coming to a town near you!

  • Test and measurement rental equipment

    Commercially attractive solutions to meet your technical needs!

  • 2016 Training Calendar

    Celemetrix training services - value through knowledge and experience. Registrations are now open!

  • Hand Tool Kits

    Be confident that you have the right tools for the job.

  • Service Repair and Calibration Capabilities

    Celemetrix offers extensive local calibration, repair and functional testing services across a range of equipment.

  • Test and Measurement Equipment : Ex-Rental SALE!

    Secure a bargain from our sale of ex-rental products. All items fully calibrated.

Probably the best overall industry course I've done in 20 years in the industry. Well run and well presented.

Anthony Gibson, CG Communications

The course was excellent and very well presented. Even after years of experience with OTDRs, I still learnt a thing or two. I would highly recommend and wish I could have sat this course at the start of my career. Kenny was one of the best trainers I've come across.

Brock Richens, NBN Co.

Excellent teacher. Attended similar courses before, this one 'brought it all together'. More usable in the workplace. Easier to understand, very thorough explanation.

Keith Masuwale, NBN Co.

Andrew, the trainer was very knowledgeable, easy to understand and was a great help when I needed help. Very good. Thanks.

Luke Von Wald, VisionStream

Thankyou to Matt & his team for bringing this unit to the west, I look forward to seeing you next year for a repeat of the excellent service received over the last few years.

Mal Fawcett, Optimal Fibre Service

Thanks again for the training, I didn’t expect I would get as much out of it as I did. Let me know when the next splicing course comes to Perth, I’ll book a few seats on it.

Michael O'Malley, Minelect Pty Ltd

Thanks for the great NBN & FTTP training session we had yesterday. It is extremely useful to receive information from someone directly involved in what’s going on.

Mike Ott, C-COR

With regards to our recent equipment calibrations, I would like to thank you and your team for your efficient service. The fact that you worked over the weekend to have our equipment available for Monday morning was really appreciated.

Stuart Hosie, Visionstream


> Request Access to NBN Software Area